Throttle Valve
COMBO VALVE
당사 Combo Valve는 Throttle Valve와 Circular Gate Valve or Right Angle Valve를 기능을 결합시켜 장비의 설치 공간 및 원가를 현격히 낮출 수 있는 통합 제품입니다.
각 Unit의 개별적으로 제어가 필요하고, Spec은 각각의 Unit Spec 사양과 동일합니다.
아래 Specification 내용을 참조하시기 바랍니다.
| Features | Customer Order Made |
Size(ID) | Customer Order Made |
- Specifications
Valve Unit | Pressure range | 1 X 10-8 mbar to 1.2bar(abs) |
| Leak rate valve seal & body | 1 X 10-9 mbar ls-1 | |
Cycles until first service
| 2,000,000 2,000,000 | |
Admissible operating temp.
| ≤ 120℃ ≤ 150℃ |
Gate Valve | Material
| SUS304 SUS304 Viton Viton(Option Kalrez) AM350 |
| Max. differential pressure at opening | ≤ 30mbar (22Torr) | |
| Mounting Position | Any | |
| Pneumatic cylinder Pressure | 70 to 100psig |
Throttle Valve | Materia - Body | SUS304 or AL |
| Input Power Reuqired | 24VDC/3A | |
| Controller Repeatability | ±0.1% of F.S | |
| Resolution | 1/18,000 | |
| Sensor Power Input | +24VDC(Optional ±5%@1.5Amp) | |
| Speed(Open/Close) | Less than 1.0sec | |
| Interface | RS232 or RS485(Standard) Analog(Option) DeviceNet Ethernet EtherCAT(Option) | |
| Electronics MTBF | 1,000,000Cycle (Full Open/Close Repeat Test @Normal State) |
Orer Information example : GCV160ARD-GCVOGCV160ARD-P
| Flange | Code | Configuration (ex, ISO100SROI8) |
| ISO-KF ISO-F | NW ISO | ISO |
| SIZE(mm) | ||
| 25 to 1,000 | 40 to 100 | 100 |
| Material | ||
| SUS | S | S |
| Flapper Type | ||
| Round | R | R |
| Sealing | ||
| O-ring Sealing Non O-ring Sealing | O (Not written) | - |
| Control Type | ||
| Integrated Separated | I8H H | I8H |
- EX) ISO100SRI8H
Flange is ISO, Size is 100mm, material is SUS, Flapper is round type valve & Non O-ring is
seal type and Integrated throttle controller with Heating Option.